SIMACO 110v AC Water Pump 2.5 Amp

Stock Code: ZZSIM003
MPN: WAP1101

Descriptions

Simaco KN35 KN37 waterpump with 110 volt motor fitted with 8mm hose tails ready to connect to a water cooler or water recirculation unit to cool MIG and TIG welding torches. Also replaces Simaco KN33 model.

Top quality long life European made water pumps designed for welding machines.

Suitable for most cooled welding machines.

Used by TECARC, ESAB, KEMPPI, LINCOLN & many other manufacturers.

Constructed with a brass pump head and impeller with a stainless steel drive shaft. The pump head can be rotated through 90 degree angles so the inlet and outlet ports can be turned to suit your requirements. Ports have an 8mm male nipple for hose connection. Maximum unrestricted flow 10 Litres per min but typically 2-3 Litres a minute when connected to a water cooled MIG or Tig torch. The motor is fitted with a capacitor and wiring instructions. Each unit is fitted with slotted feet for easy mounting.

Approx size Length 200mm, width 110mm, height 110mm.