Lorch R 200 Synergic Mig Welding Machine 230V

Stock Code: WPLR200CP
MPN: 226.2000.0

Descriptions

Lorch R 200 Synergic MIG Welder

Rugged, simple and fast. The Lorch R 200 is a compact, inverter‑driven MIG/MAG machine built for daily use in the workshop and on light fabrication. Can be used in manual mode or with Synergic programs and the clear ControlPro Control panel make setup quick, while multi‑process capability (MIG/MAG, MMA and DC lift TIG) keeps you flexible.

"3 steps and weld" operating concept
Visualized sheet thickness and seam geometry
Arc length correction
Modes for electrode and TIG

Part no. 226.7001.0 ·230 V 1‑phase

Why choose the R 200

Built for the workshop: robust IP23S housing with 2‑roll wire drive and industrial connectors.
Synergic control: pre‑loaded programs for common wires and gases help you dial‑in fast with minimal spatter.
Multi‑process: MIG/MAG as standard plus MMA (Stick) and DC lift TIG modes.
ControlPro interface: large LCD, sheet‑thickness selection and arc‑length trim—simple, repeatable setup.
Inverter efficiency: high duty cycle performance with stable arc characteristics and reduced rework.
Ready‑to‑weld packages: optional torch, earth lead and regulator kits available from WASP Supplies.

Technical specifications

Figures below reflect typical R 200 values. Full details are provided in the official Lorch datasheet; specifications may vary with configuration.

Input power	230 V, 1‑phase, 50/60 Hz
Welding current range	25-200 A
Voltage range (MIG/MAG)	15-24 V
Duty cycle (40 °C)	~100 A @ 100% · ~105 A @ 60%
Wire drive	2‑roll
Wire diameters	Solid 0.6–1.0 mm · Flux‑cored up to 1.0 mm

Dimensions (L×W×H)	~880 × 400 × 755 mm
Weight	~40 kg
Protection class	IP23S (EN 60529)
Standards	CE‑marked
Cooling	Fan‑cooled
Warranty	3 years with registration (UK)