TT200 20 kg Tech Arc mini welding turntable positioner 230 volt supply. 

This range of welding turntables are designed for light to medium industrial applications and are ideal for producing circular welds & for fast positioning of the work piece.

As standard the TT200, is supplied with a foot switch to stop & start the rotation.

On the front panel there is a switch to select clockwise or anticlockwise rotation, a knob to control the speed.

The turntable can be positioned to any angle between horizontal & 90 degrees, a hand wheel which drives a worm gear is fitted at the rear to adjust this angle, a lock off device is fitted to prevent the table being accidentally moved or knocked off angle. The table is machined with 3 slots  for mounting jigs or the optional 3 jaw chuck.

The table is also scored every 30mm with a circle to assist in accurate setting up of the job. Under the table is a substantial brass bush arrangement for the welding earth return and we supply a bare ended 2M welding lead attached to this,

Choosing the correct product.
For general low precision light applications and where fast rotation is important the TT200, TT600 and TT1000 are ideal products.

For slow rotation applications such as TIG welding we recommend the TT1000 precision & the TT3000, they are fitted with a double reduction gearbox to enable work at slower speeds & higher torque, therefore the table speed will remain very stable even with a fluctuating load.

All models are protected from HF interference.