Hypertherm Powermax45 SYNC plasma cutter CE

088565 Package includes 415 volt 3 phase Hypertherm Powermax 45 SYNC power source, CE marked for use in Europe, 6.1m 75 degree SmartSync hand torch, 6.1m earth lead, 45 amp drag cutting cartridge. 

For metal workers who want the most versatile system available to Cut, Gouge and mark, Powermax45 SYNC delivers the best return on investment with a patented single-piece cartridge, up to 5x longer consumable life, and greater cutting power than higher-amperage competitors.

With the relevant cartridge this machine can be used for all of these process's :- 

• Drag cutting up to 45 Amps in direct contact with the workpiece
• Fine cut, for improved cutting on materials 3mm and below 
• Max control Gouging - precise metal removal for light metal washing 
• Max removal Gouging - For aggressive removal of weld seams
• Mechanised Cutting 
• Metal Marking - at 10 Amps and Above 

For Both 230 volt single phase and 415 volt 3 phase versions of this machine the cutting capacities are the same.

• Max Cutting thickness ( Severence Cut) 29mm  @ 125mm/min
• Recommended Production Cut 16mm @ 500mm/min 
• Recommended pierce capacity for mechanised systems with DTHC 12mm. 

Specifications 

• Weight 15kg 
• 230v single phase version 32 amp input required 
• 415v  three phase version 10 amp input required 
• Output 9-45 Amps 
• Recommended air supply, 118L/min @ 5.9bar (400CFH @ 85 PSI) 
• input power cable 3m 
• Generator requirement for full 45amps 12.5KVa 

Easy fit 1/4 turn Cartridges automatically set the cutting mode and cutting current on the the power source to suit each type of cartridge 

• Yellow - handheld drag cutting available in, 30, 45, 65, 85 and 105 Amp
• Green - Handheld Gouging available in 45-85 and 105 Amp 
• Grey Mechanised cutting available in 30, 45, 65, 85 and 105 Amp 
• Black Flush Cut - 45 degree cutting available in 65, 85 and 105 Amp 
• Black HyAcess for cutting/gouging in hard to reach areas 65 Amp