2.5 % additional discount if paying by BACS, just select this payment method at the checkout.
Free Delivery on Orders Over £70 to UK mainland excluding Scottish Highlands.

55mm Long HMT CarbideMax Ultra Broaching Cutters 16-60mm Diameter

This section of the Wasp Supplies online store is for ordering HMT CarbideMax Ultra TCT broaching cutters with a 55mm cutting depth in sizes 16mm to 60mm These CarbideMax Ultra cutters are designed to drill hardened steel plates such as Hardox 500, Armour steel and Stainless Steel with any slow speed, high torque Magnetic drill with a 19mm Weldon Shank.

Sort By
Showing products 1 to 75 of 75
HMT 12-17mm HMT CarbideMax 55 Broach Cutter Pilot Pins  108020P-0170

For use with cutters up to 17mm  

Ejector pin 108020P-0170

£12.96
£15.55 (inc. VAT)
£15.25
HMT 16mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0160

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0170

£55.04
£66.05 (inc. VAT)
£64.75
HMT 17.5mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0175

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0170

£57.55
£69.06 (inc. VAT)
£67.70
HMT 17mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0170

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0170

£55.51
£66.61 (inc. VAT)
£65.30
HMT 18mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0180

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£57.76
£69.31 (inc. VAT)
£67.95
HMT 19mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0190

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£65.03
£78.04 (inc. VAT)
£76.50
HMT 20mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0200

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£68.34
£82.01 (inc. VAT)
£80.40
HMT 21mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0210

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£68.64
£82.37 (inc. VAT)
£80.75
HMT 22mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0220

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£71.10
£85.32 (inc. VAT)
£83.65
HMT 23mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0230

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£75.06
£90.07 (inc. VAT)
£88.30
HMT 24mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0240

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£78.75
£94.50 (inc. VAT)
£92.65
HMT 25mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0250

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£81.13
£97.36 (inc. VAT)
£95.45
HMT 26mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0260

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£82.03
£98.44 (inc. VAT)
£96.50
HMT 26.5mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0265

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£87.89
£105.47 (inc. VAT)
£103.40
HMT 27mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0270

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£90.74
£108.89 (inc. VAT)
£106.75
HMT 28mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0280

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£91.46
£109.75 (inc. VAT)
£107.60
HMT 29mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0290

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£91.93
£110.32 (inc. VAT)
£108.15
HMT 30mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0300

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£96.73
£116.08 (inc. VAT)
£113.80
HMT 31mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0310

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£100.77
£120.92 (inc. VAT)
£118.55
HMT 32mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0320

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£102.09
£122.51 (inc. VAT)
£120.10
HMT 33mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0330

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£105.23
£126.28 (inc. VAT)
£123.80
HMT 34mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0340

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£110.84
£133.01 (inc. VAT)
£130.40
HMT 35mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0350

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£115.94
£139.13 (inc. VAT)
£136.40
HMT 36mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0360

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£125.04
£150.05 (inc. VAT)
£147.10
HMT 37mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0370

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£127.46
£152.95 (inc. VAT)
£149.95
HMT 38mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0380

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£130.82
£156.98 (inc. VAT)
£153.90
HMT 39mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0390

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£133.88
£160.66 (inc. VAT)
£157.50
HMT 40mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0400

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£136.72
£164.06 (inc. VAT)
£160.85
HMT 41mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0410

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£140.51
£168.61 (inc. VAT)
£165.30
HMT 42mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0420

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£142.25
£170.70 (inc. VAT)
£167.35
HMT 43mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0430

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£144.80
£173.76 (inc. VAT)
£170.35
HMT 44mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0440

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£148.20
£177.84 (inc. VAT)
£174.35
HMT 45mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0450

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£150.41
£180.49 (inc. VAT)
£176.95
HMT 46mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0460

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£153.94
£184.73 (inc. VAT)
£181.10
HMT 47mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0470

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£156.44
£187.73 (inc. VAT)
£184.05
HMT 48mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0480

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£159.50
£191.40 (inc. VAT)
£187.65
HMT 49mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0490

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£162.61
£195.13 (inc. VAT)
£191.30
HMT 50mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0500

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£165.24
£198.29 (inc. VAT)
£194.40
HMT 51mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0510

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£168.47
£202.16 (inc. VAT)
£198.20
HMT 52mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0520

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£171.11
£205.33 (inc. VAT)
£201.30
HMT 53mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0530

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£173.70
£208.44 (inc. VAT)
£204.35
HMT 54mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0540

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£177.01
£212.41 (inc. VAT)
£208.25
HMT 55mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0550

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£179.61
£215.53 (inc. VAT)
£211.30
HMT 56mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0560

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£180.20
£216.24 (inc. VAT)
£212.00
HMT 57mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0570

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£181.77
£218.12 (inc. VAT)
£213.85
HMT 58mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0580

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£183.09
£219.71 (inc. VAT)
£215.40
HMT 59mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0590

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£184.24
£221.09 (inc. VAT)
£216.75
HMT 60mm  CarbideMax Ultra Cutter for Hardox  55 mm cutter depth  108070-0600

Drills Hardox, Armour Plate and Stainless Steel. 

Use with ejector pin 108020P-0600

£185.22
£222.26 (inc. VAT)
£217.90