2.5 % additional discount if paying by BACS, just select this payment method at the checkout.
Free Delivery on Orders Over £70 to UK mainland excluding Scottish Highlands.

110mm Long HMT CarbideMax Ultra Broaching Cutters 16-60mm Diameter

This section of the Wasp Supplies online store is for ordering HMT CarbideMax Ultra TCT broaching cutters with a 110mm cutting depth in sizes 16mm to 60mm These CarbideMax Ultra cutters are designed to drill hardened steel plates such as Hardox 500, Armour steel and Stainless Steel with any slow speed, high torque Magnetic drill with a 19mm Weldon Shank.

Sort By
Showing products 1 to 43 of 43
HMT 14-17mm  CarbideMax 110 Pilot Pins, Pack of 2 108040P-0171

For 110mm long cutters up to 17mm dia

Ejector pin 108040P-0171

£30.94
£37.13 (inc. VAT)
£36.40
HMT 16mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0160

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0171

£126.69
£152.03 (inc. VAT)
£149.05
HMT 18-60mm  CarbideMax 110 Pilot Pins, Pack of 2 108040P-0600

For 110mm long cutters 18mm to 60mm

Ejector pin 108040P-0600

£30.94
£37.13 (inc. VAT)
£36.40
HMT 18mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0180

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£129.54
£155.45 (inc. VAT)
£152.40
HMT 19mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0190

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£131.33
£157.60 (inc. VAT)
£154.50
HMT 20mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0200

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£131.92
£158.30 (inc. VAT)
£155.20
HMT 21mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0210

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£133.37
£160.04 (inc. VAT)
£156.90
HMT 22mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0220

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£134.05
£160.86 (inc. VAT)
£157.70
HMT 23mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0230

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£139.53
£167.44 (inc. VAT)
£164.15
HMT 24mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0240

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£141.95
£170.34 (inc. VAT)
£167.00
HMT 25mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0250

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£142.25
£170.70 (inc. VAT)
£167.35
HMT 26mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0260

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£147.86
£177.43 (inc. VAT)
£173.95
HMT 27mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0270

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£152.02
£182.42 (inc. VAT)
£178.85
HMT 28mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0280

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£156.44
£187.73 (inc. VAT)
£184.05
HMT 29mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0290

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£162.27
£194.72 (inc. VAT)
£190.90
HMT 30mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0300

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£167.58
£201.10 (inc. VAT)
£197.15
HMT 32mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0320

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£178.76
£214.51 (inc. VAT)
£210.30
HMT 33mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0330

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£184.41
£221.29 (inc. VAT)
£216.95
HMT 34mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0340

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£186.87
£224.24 (inc. VAT)
£219.85
HMT 35mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0350

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£195.54
£234.65 (inc. VAT)
£230.05
HMT 36mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0360

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£201.15
£241.38 (inc. VAT)
£236.65
HMT 38mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0380

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£223.25
£267.90 (inc. VAT)
£262.65
HMT 39mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0390

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£253.68
£304.42 (inc. VAT)
£298.45
HMT 40mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0400

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£281.35
£337.62 (inc. VAT)
£331.00
HMT 41mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0410

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£294.10
£352.92 (inc. VAT)
£346.00
HMT 42mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0420

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£303.54
£364.25 (inc. VAT)
£357.10
HMT 43mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0430

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£325.68
£390.82 (inc. VAT)
£383.15
HMT 44mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0440

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£334.35
£401.22 (inc. VAT)
£393.35
HMT 45mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0450

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£344.25
£413.10 (inc. VAT)
£405.00
HMT 46mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0460

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£351.26
£421.51 (inc. VAT)
£413.25
HMT 47mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0470

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£354.45
£425.34 (inc. VAT)
£417.00
HMT 48mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0480

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£359.72
£431.66 (inc. VAT)
£423.20
HMT 49mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0490

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£361.25
£433.50 (inc. VAT)
£425.00
HMT 50mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0500

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£362.74
£435.29 (inc. VAT)
£426.75
HMT 51mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0510

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£366.65
£439.98 (inc. VAT)
£431.35
HMT 52mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0520

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£367.29
£440.75 (inc. VAT)
£432.10
HMT 54mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0540

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£371.71
£446.05 (inc. VAT)
£437.30
HMT 55mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0550

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£374.47
£449.36 (inc. VAT)
£440.55
HMT 56mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0560

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£383.14
£459.77 (inc. VAT)
£450.75
HMT 57mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0570

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£394.06
£472.87 (inc. VAT)
£463.60
HMT 58mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0580

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£402.90
£483.48 (inc. VAT)
£474.00
HMT 59mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0590

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£412.42
£494.90 (inc. VAT)
£485.20
HMT 60mm  Ultra CarbideMax Cutter for Hardox  110mm cutter depth  108090-0600

Drills Hardox, Armour Plate and Stainless steel

Use with ejector pin 108040P-0600

£416.54
£499.85 (inc. VAT)
£490.05