0700300998 ESAB Rebel EMP 205ic AC/DC Multi-process welder 110 + 240 volt supply

The 0700300998 ESAB Rebel 205ic AC/DC multi-process Mig, MMA and Tig welder is a breakthrough in welding technology. This machine is packed with features to be able to operate all welding processes from one highly portable power source,  including 235 amp output Mig welding,and reverse polarity Mig welding for self shielding flux cored wires, 170 amp MMA (arc - welding) including Cellulosic function, 205 amp DC Tig with high frequency start and 205 amp AC Tig with Balance and Frequency control for welding Aluminium. 

Not only can this portable power source (26kg) weld every process, it can also perform absolutely anywhere as it is capable of working from a single phase supply with an input voltage range of 110 volt for Construction sites through to 230 volt when back in the Workshop, Garage or Industrial premises. 

Delivery includes:

• REBEL EMP 205ic AC/DC power source with 3 m mains cable and plug,
• 0700025220 MXL 201 MIG (Binzel MB15 style) torch 3m, 
• 0700025580 SR-B 26 TIG torch ( WP26 style ) with accessories (3 collet 1.6, 2.4, 3.2 mm, 3 collet body 1.6, 2.4, 3.2 mm, 1 long back cap, 3 ceramic nozzles and 3 gold tungstens1.6-3.2 mm),
• 0700006003 electrode holder 3m ,
• earth return cable and clamp 3 m,
• gas hose with quick connector
• 4.5 m, drive rolls for 0.6, 0.8 and1.0 mm wire, guide tubes 0.6-1.2 mm, thickness gauge tool

• Professional TIG features such as High Frequency start in DC and AC modes, balance adjustment, frequency adjustment and Pulse DC.

• sMIG Technology - exclusive sMIG ("smart MIG") feature continuously learns and adapts to the operator’s welding technique to provide a stable arc and superior, repeatable welds; increases productivity for the experienced welder, and reduces training time for novice welders

• Unmatched Portability and Durability weighing in at only 25.5kg, Rebel EMP 205ic AC/DC with 5 handle roll cage can tackle any job around the shop or out on site

• TFT Multilingual Display - packed full of features, Rebel EMP 205ic AC/DC has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting - giving you the ability to fine tune your welds for the most optimal performance

• Amplitute offset - Effortlessly direct more energy into the workpiece, remove heat from the tungsten to avoid balling and damage, create a smaller bead profile, improve penetration, or reduce preheat on thick material.

• Dual solenoid value - Conveniently set up your MIG gas and your TIG gas without having to switch back and forth.

• Pulsed TIG - Pulsed TIG DC range between 1 and 500 pulses per second (pps): Achieve better control and higher travel speeds when working with thin carbon steel or stainless steel.

• AC Performance - AC wave balance from 60% to 90% electrodenegative (EN) amperage: Turn it up to boost penetration, and turn it down to help clean away aluminium oxide. AC frequency from 25 to 400 Hz: Get precise control over the arc cone and direction for superior penetration and higher travel speeds.

Full function TIG features
Fixed or limited settings won’t cut it in the industrial world. We built Rebel EMP 205ic AC/DC for welders who want full control over the arc for unmatched performance. That means you get Lift TIG and high frequency (HF) start, AC wave balance (60%–90%), AC frequency (25–400 Hz), pulsed (DC) (1–500 pps), and amplitude offset – the next level in AC TIG adjustment.

For more info and detailed technical information please download the spec sheet here 

The Esab Rebel range consists of 

0700300998 ESAB Rebel EMP 205ic AC/DC Multi Process  welder 110/230v input 

0700300985 ESAB Rebel EMP 215ic Mig, MMA and lift DC Tig welder 110/230v input 

0700300989 ESAB Rebel EMP 235ic Mig, MMA and lift  DC Tig welder 110/230v input 

0700300982 ESAB Rebel EMP 255ic Mig, MMA and Lift  DC Tig welder 415v input 

0700300991 ESAB Rebel EMP 320ic Mig, MMA and Lift DC Tig welder 415v input