The Roller Table RTO-3000 is an Outfeed Roller Table. Because of this, it has a lockable and scaled material stop. This material stop allows you to precisely measure the material that will be cut from the blade to the stop.

A roller table can greatly improve the output of your sawing operations, assisting with transportation to and from the machine. In addition, a good quality roller table acts as important support to both hold the material and also keep it level.

Furthermore, this roller table can hold a hefty 800kgs of material, and move it easily towards or away from the cutting machine’s blade.

The Roller Table RTO-3000 is fully adjustable between 600mm and 1000mm heights. This allows it to assist the process of many metal cutting coldsaws and bandsaws, and not just DIMAKIN equipment.

The length of the Roller Table RTO-3000 is 3,000mm, and is the larger of the range. However, if you require a shorter version, a two metre version of the same table can be found here. This roller table has twelve robust heavy duty rollers. Lastly, at a lean but valuable 300mm wide, this roller table will be a valuable add-on to your production setup.

OUTFEED ROLLER TABLE RTO-3000 FEATURES:

• 3000mm x 300mm working area dimensions
• Lockable position scale and material stop
• Adjustable height range between 600mm and 1000mm
• Twelve heavy duty supportive rollers
• 800kg maximum load capacity

This model is designed to be your Outfeed Roller Table. Similarly, to find an Infeed Roller Table to compliment your setup, go to the infeed rollers section!