Miller Dynasty 210 DX AC/DC tig welder
True Professional 210 amp AC/DC tig welder, with huge 60% duty cycle @ 210 amps*
Miller Auto line technology, runs on any voltage, 110 and 240 single phase or 415v three phase
This small and extremely portable Miller Dynasty AC/DC tig welder has all the features you would expect in a larger static machine based in the workshop, including slope and gas controls, Pulser up to 500 HZ, AC balance 50-99%, AC frequency 20-400 HZ, 4 types of Aluminium waveforms,
- 3- or 1-Phase Power
TIG Rated Output
- 210 A at 18 V, 60% Duty Cycle both AC and DC tig when used from 208-480 v supply
- 125 A at 15 V, 60% Duty Cycle both AC and DC Tig when used from 110v supply
Tig Welding Amperage Range
- 1-210 Amps on all voltages 110, 240 and 415 v
Complete packages — Air and water cooled packages that include all the items to start TIG welding.
Blue Lightning™ - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
AC TIG Features
Extended AC Balance (50-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
AC frequency (20-400 hz) controls the width of the arc cone and the force of the arc.
Advance Squarewave, fast freezing puddle, deep penetration, and fast travel speeds.
Soft Squarewave for a soft buttery arc with maximum puddle control and good wetting action.
Sine wave for customers that like a traditional arc. Quiet with good wetting.
Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds.
Supplied with Miller Coolmate 1.3 chiller, WP20 x 4m Tig torch, earth lead and regulator.
Click logo for brochure