Home > Welding and Cutting equipment > Mig welding equipment > Mig welding machines > 3 Phase Mig welders

Lorch M-Pro 300 Mig Welding machines - Basic plus and ControlPro models.« Back

Lorch M-Pro 300 Mig Welding machines - Basic plus and ControlPro models. from wasp supplies ltd
Lorch M-Pro 300 Mig Welding machines - Basic plus and ControlPro models. from wasp supplies ltd Lorch M-Pro 300 Mig Welding machines - Basic plus and ControlPro models. from wasp supplies ltd Lorch M-Pro 300 Mig Welding machines - Basic plus and ControlPro models. from wasp supplies ltd Lorch M-Pro 300 Mig Welding machines - Basic plus and ControlPro models. from wasp supplies ltd
synergic control
Condition: New
£1,460.00
£1,525.00
Panel type
Select currency
US DollarEuroAustralian DollarCanadian DollarPound SterlingDanish KroneSwedish Krona
 

click here for a special deal on this machine

LORCH M Pro 300 Mig Welding Machine

- Ring for latest deals.

This Mig welding machine will cut down on spatter !

415v three phase machine

Synergic Control Mig welding machine. Simply set the pre programmed controller to the wire diameter and type of material to be welded. Use 1 knob control to set the plate thickness on the digital display panel

Pick the torch up and weld !!!!!

These machines are standard equipment with copper wound transformers that are suited to harsh working environments.

Normal Mig welding machines need the wire to be tuned to the voltage setting independantly.

Incorrect setting of wire/voltage is the most common cause of excess spatter !

2 Levels of control

BasicPlus concept:- automatic setting control- 2-roller wire feeder- user-oriented guidance using illuminated symbols

ControlPro concept:- automatic setting control- 4-roller wire feeder- volt and ampere display- user-oriented guidance using illuminated symbols

The Lorch "M Pro" series range of machines give optimum weld settings all the time.

Simply turn the voltage switch for more or less power all other settings adjust automatically, Including wire feed, gas post flow, Inductance and burn back. Can also be used in manual mode as well.

 The front control panel also allows you to select Spot & Stitch welding modes, 2T & 4T Torch Control, as well as manually over-ride the Synergic pre-programs.

Front Control panel has Voltage selection, wire feed fine tune dial, spot/stitch timer On/off .

3 year Parts and labour warranty , takes 15 kg spools of wire. Wire feed/inch button included.

package price includes Binzel style MB25 Mig torch, earth lead and Argon / CO2 regulator.

M Pro 250, 30-300amp machine, ideal for fabrications up to 20 mm

If Shipping is required outside UK mainland (excluding scottish highlands) please contact us for exact shipping costs before ordering.

Weight 80kg
Output Range: 30 – 300 Amps
Voltage Steps: 12
Weldable Wires: Mild Steel 0.6 -1.2mm, Stainless Steel 0.8 - 1.2mm, Aluminium 1.0 - 1.2mm
Welding Gases: Mixed Gases & CO2
Duty Cycle: 30% @ 300 Amps, 60% @ 210 Amps, 100% @ 160 Amps
Dimensions: 880mm Long x 400mm Wide x 755mm High
Input 415v

 

This Product has no Specifications.

This Product has no Videos.

This Product has no Downloads.

Pay with MastercardPay with VisaPay with PayPalPay with MaestroPay with Direct DebitPay with CirrusPay with Visa Electron