LORCH M Pro 300 Control Pro Mig Welding Machine, ready to weld package includes power source, MB25 mig torch, earth lead, Argon/Co2 gas regulator.
This Mig welding machine will cut down on spatter !
415v three phase machine
Synergic Control Mig welding machine. Simply set the pre programmed controller to the wire diameter and type of material to be welded. Use 1 knob control to set the plate thickness on the digital display panel. settings for mild steel, stainless steel, Aluminium included.
Pick the torch up and weld !!!!!
These machines are standard equipment with copper wound transformers that are suited to harsh working environments.
Normal Mig welding machines need the wire to be tuned to the voltage setting independently.
Incorrect setting of wire/voltage is the most common cause of excess spatter !
ControlPro concept:- automatic setting control- 4-roller wire feeder- volt and ampere display- user-oriented guidance using illuminated symbols
The Lorch "M Pro" series range of machines give optimum weld settings all the time.
Simply turn the voltage switch for more or less power all other settings adjust automatically, Including wire feed, gas post flow, Inductance and burn back. Can also be used in manual mode as well.
The front control panel also allows you to select Spot & Stitch welding modes, 2T & 4T Torch Control, as well as manually over-ride the Synergic pre-programs.
Front Control panel has Voltage selection, wire feed fine tune dial, spot/stitch timer On/off .
3 year Parts and labour warranty , takes 15 kg spools of wire. Wire feed/inch button included.
package price includes Binzel style MB25 Mig torch, earth lead and Argon / CO2 regulator.
M Pro 300, 30-300amp machine, ideal for fabrications up to 16 mm
If Shipping is required outside UK mainland (excluding scottish highlands) please contact us for exact shipping costs before ordering.
|Output Range:||30 – 300 Amps|
|Weldable Wires:||Mild Steel 0.6 -1.2mm, Stainless Steel 0.8 - 1.2mm, Aluminium 1.0 - 1.2mm|
|Welding Gases:||Mixed Gases & CO2|
|Duty Cycle:||30% @ 300 Amps, 60% @ 210 Amps, 100% @ 160 Amps|
|Dimensions:||880mm Long x 400mm Wide x 755mm High|