Wasp Supplies are recruiting, see our Job Opportunities section

Lorch M-Pro 250 Performance Mig Welding machine 415v

£2,166.00 (ex. VAT)
« Back

LORCH M Pro 250 Performance Mig Welding Machine

- Ring for latest deals.

This Mig welding machine will cut down on spatter !

415 volt 3 phase machine. 

Synergic Control Mig welding machine. Simply set the pre programmed controller to the wire diameter and type of material to be welded. Use 1 knob control to set the plate thickness on the digital display panel

Pick the torch up and weld !!!!!

Using latest Digistep technology Lorch have integrated a microprocessor that gives electronic control to a standard welding machine. The control panel is used to programme all weld settings, once wire diameter and material type are saved, 21 pre programmed power settings can be accessed immediately.

Once suitable weld conditions are programmed, they can be saved in one of the 100 memory slots.

Using digital technology, the weld settings can slso be changed or recalled using the Lorch Powermaster remote torch, based on Binzel style spares.

The Powermaster torch can be used in several modes,

  • adjust settings from voltage 1 through to 21
  • adjust material thickness to be welded
  • adjust wire feed speed in metres/mim

No matter what mode is selected all settings, volts, amps and wire feed are changed together at the same time by the synergic controller within the machine. The Powermaster torch is particularly useful when different material thickness's are welded on the same product. Different weld settings can be recalled instantly from the torch without the need to return to the machine to adjust settings.

These machines are standard equipment with copper wound transformers that are suited to harsh working environments.

Normal Mig welding machines need the wire to be tuned to the voltage setting independantly.

Incorrect setting of wire/voltage is the most common cause of excess spatter !

The Lorch "M Pro" series range of machines give optimum weld settings all the time.

 The front control panel also allows you to select Spot & Stitch welding modes, 2T & 4T Torch Control, as well as manually over-ride the Synergic pre-programs.

3 year Parts and labour warranty , takes 15 kg spools of wire. Wire feed/inch button included.

package price includes Binzel style MB25 Mig torch or Lorch Powermaster ML2400, earth lead and Argon / CO2 regulator. 

M Pro 250, 30-250amp machine, ideal for fabrications up to 12 mm.

If Shipping is required outside UK mainland (excluding scottish highlands) please contact us for exact shipping costs before ordering.

Weight 73kg
Output Range: 30 – 250 Amps
Voltage Steps: 21
Weldable Wires: Mild Steel 0.6 -1.0mm, Stainless Steel 0.8 - 1.0mm, Aluminium 1.0 - 1.2mm
Welding Gases: Mixed Gases & CO2
Duty Cycle: 30% @ 250 Amps, 60% @ 170 Amps, 100% @ 140 Amps
Dimensions: 880mm Long x 400mm Wide x 755mm High
Input 415 volt

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product