LORCH M Pro 170 Mig Welding Machine
This Mig welding machine will cut down on spatter
Synergic Control Mig welding machine. Simply set the pre programmed controller to the wire diameter and type of material to be welded. Use 1 knob control to set the plate thickness on the digital display panel
Pick the torch up and weld !!!!!
These machines are standard equipment with copper wound transformers that are suited to harsh working environments.
Normal Mig welding machines need the wire to be tuned to the voltage setting independantly.
Incorrect setting of wire/voltage is the most common cause of excess spatter !
BasicPlus concept:- automatic setting control- 2-roller wire feeder- user-oriented guidance using illuminated symbols
The Lorch "M Pro" series range of machines give optimum weld settings all the time.
Simply turn the voltage switch for more or less power all other settings adjust automatically, Including wire feed, gas post flow, Inductance and burn back. Can also be used in manual mode as well.
The front control panel also allows you to select Spot & Stitch welding modes, 2T & 4T Torch Control, as well as manually over-ride the Synergic pre-programs.
Front Control panel has Voltage selection, wire feed fine tune dial, spot/stitch timer On/off and 240 or 415v switch for single or 3 phase machines, dual voltage machines are even supplied with a 3 phase to single phase fly lead so no wiring changes are necessary when changing from 240 to 415v supplies.
3 year Parts and labour warranty , takes 15 kg spools of wire. Wire feed/inch button included.
package price includes Binzel style MB15 Mig torch, earth lead and Argon / CO2 regulator.
M Pro 170, 25-170amp machine, ideal for fabrications up to 6mm.
230v single phase and 415volt 3 phase input.
If Shipping is required outside UK mainland (excluding scottish highlands) please contact us for exact shipping costs before ordering.
|Mains Voltage:||230v AND 415v|
|Output Range:||25 – 170 Amps|
|Weldable Wires:||Mild Steel 0.6 -0.8mm, Stainless Steel 0.6 - 0.8mm, Aluminium 0.8-1.0mm|
|Welding Gases:||Mixed Gases & CO2|
|Duty Cycle:||25% @ 170 Amps, 60% @ 110 Amps, 100% @ 90 Amps|
|Dimensions:||880mm Long x 400mm Wide x 755mm High|