Wasp Supplies are recruiting, see our Job Opportunities section
Lorch Handy Tig 180 DC Basic Plus from Wasp supplies online store
Lorch Handy Tig 180 DC Basic Plus from Wasp supplies online store
Lorch Handy Tig 180 DC Basic Plus from Wasp supplies online store
Lorch Handy Tig 180 DC Basic Plus from Wasp supplies online store
Lorch Handy Tig 180 DC Basic Plus from Wasp supplies online store

Lorch HandyTig 180 DC Control Plus Assembly pack

£1,495.00
£1,794.00 (ex. VAT)
£1,595.00
DC tig with High frequency start and Automatic Gas management. Digital display, ready to weld.
« Back
Information
The Lorch HandyTig 180 DC Control Pro is a high quality welding machine, with non contact high frequency ignition, auto gas management and slope out facility , memory and digital display. 230 volt single phase 
  • 3 steps to weld operating concept
  • simple current setting, can also be adjusted at the torch (up/down torch required)
  • digital display
  • switch 2 stroke / 4 stroke 
  • remote control as std
  • job memory for 2 tig and 2 electrode welding tasks

Assembly pack DC ready to weld 
3 m electrode and ground (earth) cable, chipping hammer, wire brush, welding shield EN 166, welding glasses, 4m up/down remote TIG torch, tungsten electrode and torch spares, pressure reducer with quantity and contents gauge, in the robust protective tool case.

optional foot control available Above.


 

The HandyTIG Series at a glance

  • Outstanding TIG weld characteristics
  • High, practical duty cycle
  • Extremely robust, guaranteed fall protection from up to 80 cm height (DC) and 60 cm (AC/DC)
  • With non-contacting HF ignition (can be changed over to ContacTIG)
  • Automatic gas management
  • Connection for hand or foot remote control
  • Electrode welding with Hotstart, Anti-Stick and Arc-Force regulation
  • Compact and light in weight
  • Provided with InsideCoating: optimum dust protection for a long service life
  • Full power even in the case of voltage fluctuations and when using long cables
  • Generator-compatible
  • Highly efficient and low energy consumption due to the most modern power electronics and the fan on demand function
  • “3 steps to weld” operating concept
  • Manufactured and tested according to DIN EN 60974-1, with CE mark, S-symbol and IP 23

- operator guidance using illuminated symbols
- infinitely adjustable welding current setting
- remote control connection

Additional in the ControlPro

  • Exact-amp, digital welding current display
  • Job memory for up to 4 welding tasks (2 x TIG, 2 x electrode)
  • Pulse function: Pulse up to 500 Hz
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product