JEI HM50 Magbeast 50mm capacity

£645.00
£774.00 (inc. VAT)
£795.00
2MT magnetic drill
Information

We have 2 verisons of this durable, heavy duty 2 morse taper drilling machine.The HM50 is a standard 2 speed machine that can use 2MT drill bits and also standard 19mm weldon shank magnetic drill cutters. 

The HM50T is the same machine with the addition of a variable speed motor 110-430 RPM that can be reversed to use with taps up to M20, simply drill your hole, change the drill for a tap, tap your hole and then switch to reverse to wind the tap out. 
 

Features & Benefits

  • Heavy duty 1150 watt motor - enables larger cutting capacity.
  • Weighs only 13kg with a 50mm cutter capacity - unrivalled weight to cutting capacity ratio.
  • 150mm total drill travel - facility to use extra long cutters.
  • Maintenance friendly twin slide rails - no wearing parts and adjustment free operation.
  • Optional  (HM-50T) Variable speed with Forward and reverse for Tapping up to M20   
  • Optional 360 degree swivel base (HM50S)

Specification

Model/strong> HM50 HM50T
Spindle MT2 MT2
Weight 13Kg 13Kg
Max Stroke 150mm 150mm
Cutter Capacity 50mm x 4" depth of cut 50mm x 4" depth of cut
Twin Drill Capacity 13mm with 2MT chuck
23mm with 2MT twist drill
13mm with 2MT chuck
23mm with 2MT twist drill
Countersink Capacity 40mm 40mm
Tapping Capacity - M20
Motor 1150 watts 1150 watts (110v) 1250 watts (240v)
RPM 2 fixed: No load 465/270 RPM. Loaded 250/450 RPM 2 variable speeds: 180-430, 110-250
Heightmin/max 410mm/560mm 410mm/560mm
Length 280mm 280mm
Width 120mm 120mm
Magnetic base Dimensions 85mm x 180mm 85mm x 180mm
Magnet dead lift 1250Kg on 25mm plate 1250Kg on 25mm plate
Noise Level Does not exceed 95 db Does not exceed 95 db
Vibration Level Does not exceeed 2.5m/s2 Does not exceeed 2.5m/s2
Voltage / Part No. 110v - Drill-HM50
240v - Drill-HM50/2
110v - Drill-HM50/T
240v - Drill-HM50/T2
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product