HMT Versadrive site essential kit, 30 piece metric taps, reamers , tct cutters and drills.
£723.90 (ex vat)
£868.68 (inc. VAT)
This product qualifies for free shipping to
UK Mainland Excluding Scottish Highlands.
Never get caught out on site again with misaligned, missing, undersize or untapped holes in steelwork.
Information
The HMT Versadrive site installation kit is the essential site tool for every steel erector. Never again, get caught on site with undersize, missing, or untapped holes or countersinks.
The versadrive range with 11mm hex drive is colour coded for use with various tools, The gold tools are optimised for use with impact drivers (except countersinks) or rotary drills and magnetic drills, . The grey tools are non impact for rotary use only.
Using your existing impact wrench, rotary/SDS drill or magnetic drill, this kit has everything to drill, tap, countersink or open up holes in steel and structural steels up to 26mm diameter.
scroll down to see each tool in action.
This kit contains the following :-
For drilling wiithout pilot drills, 6.8mm, 8.5mm, 10.5mm, 12mm and 14mm TurboTip stepped drill bits.
For opening up under size holes 10mm, 14mm, 18mm, and 22mm impact reamers.
For tapping holes on site, M8, M10, M12, M16 and M20 Impactataps.
For drilling large holes with rotary or mag drill 12mm, 14mm, 18mm, 22mm and 26mm TCT holecutters with arbours and pilot drills/springs.
For countersinking with rotary drills 16.5mm, 20.5mm and 25mm countersink bits.
Step drill 22mm
1/4" impact driver adaptor, 1/2" impact drive adaptor, Magnetic drill adaptor, SDS adaptor, 300mm extension arbour.
Hex keys 3, 4, 5mm, Spare pilot drill and pilot pin.
TurboTip drill bits in action
Impact reamers in action
Impact taps in action
Versadrive TCT holesaws in action
The versadrive range with 11mm hex drive is colour coded for use with various tools, The gold tools are optimised for use with impact drivers (except countersinks) or rotary drills and magnetic drills, . The grey tools are non impact for rotary use only.
Using your existing impact wrench, rotary/SDS drill or magnetic drill, this kit has everything to drill, tap, countersink or open up holes in steel and structural steels up to 26mm diameter.
scroll down to see each tool in action.
This kit contains the following :-
For drilling wiithout pilot drills, 6.8mm, 8.5mm, 10.5mm, 12mm and 14mm TurboTip stepped drill bits.
For opening up under size holes 10mm, 14mm, 18mm, and 22mm impact reamers.
For tapping holes on site, M8, M10, M12, M16 and M20 Impactataps.
For drilling large holes with rotary or mag drill 12mm, 14mm, 18mm, 22mm and 26mm TCT holecutters with arbours and pilot drills/springs.
For countersinking with rotary drills 16.5mm, 20.5mm and 25mm countersink bits.
Step drill 22mm
1/4" impact driver adaptor, 1/2" impact drive adaptor, Magnetic drill adaptor, SDS adaptor, 300mm extension arbour.
Hex keys 3, 4, 5mm, Spare pilot drill and pilot pin.
TurboTip drill bits in action
Impact reamers in action
Impact taps in action
Versadrive TCT holesaws in action
Specifications
-
MPN:VSD-INSET-ME
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product
