Versadrive Reamers 8 to 26mm

Home / Magnetic drills and Holemaker cutters / Holemaker technology Versadrive cutters drills, taps, reamers. / Versadrive Reamers 8 to 26mm / 501030-0240 HMT VersaDrive Reamer 24mm

501030-0240 HMT VersaDrive Reamer 24mm

HMT Versadrive reamer 24mm in available from Wasp Supplies Ltd secure online store

501030-0240 HMT VersaDrive Reamer 24mm

£82.03 £98.43 (inc. VAT) RRP: £96.50

The fastest & easiest way to enlarge an undersized and/or misaligned hole.

This product qualifies for free shipping to

UK Mainland Excluding Scottish Highlands.

Description

The 24mm HMT VersaDrive Reamer performs extremely fast and with minimal kickback when adapted for use with an impact wrench for enlarging pre drilled holes by around 3mm in steel plate up to 20mm thick. They can also be used with care in a standard low speed rotary drill with 1/2" chuck.

If used with a slow speed magnetic drill and magnetic drill adapter these VersaDrive Reamers can be used on steel plates heavier than 20mm. These reamers are the ideal way to enlarge undersized or misaligned holes.

VersaDrive Reamers can be damaged by hardened surfaces with laser or plasma cut holes. Heat affected holes can be enlarged using the VersaDrive Reamer with a slow speed magnet drill and Speedlube lubricant spray.

Precision 6-Flute design for smooth cut on structural steel.
Safer reaming with minimal kickback; specially hardened for impact wrench use.
High grade tool steel with ground flutes for high accuracy & long life
Goldmax low-friction Titanium Coating to stop heat burn-out
High Strength, non-slip shank design

Part No	D Ø mm	d1 Ø mm	I1 mm	I2 mm	L mm	Shank mm	Minimum torque to ream 15mm steel
501030-0120	12mm	7.1	43	59	144	11	280 Nm
501030-0140	14mm	7.5	52	50	144	11	320 Nm
501030-0160	16mm	8.0	58	56	152	11
501030-0180	18mm	9.4	58	56	170	11	360 Nm
501030-0200	20mm	11.2	61	66	185	11
501030-0220	22mm	13.2	61	66	185	11	400 Nm
501030-0240	24mm	15.1	63	64	185	11
501030-0260	26mm	15.9	61	64	185	11	520 Nm