HMT Versadrive M16 impactatap quick threading impact tap.
£41.74
£50.09 (inc. VAT)
£49.10
M16 x 2.0mm thread up to 15 times faster than hand tapping.
Information
HMT Versadrive impactatap M16 x 2.0 mm thread tapping bit that can be used with an impact wrench and taps holes up to 15 times faster than when using a hand tap wrench, the Holemaker technology (HMT) versadrive system allows the tapping bit to be used not only in an impact wrench but also in any reversable drill with a 1/2" chuck and any hand tap wrench. The video below shows how versatile these metal cutting taps can be :-
.
Versadrive Impacta taps
.
Versadrive Impacta taps
- Extremely Fast tapping with minimal kickback, specially hardened for Impact wrench use.
- Chipbreaker action for automatic chip clearance when impact tapping
- Unique dual point starting angle for easy alignment and fast cut.
- Very high grade toolsteel, with ground flutes for high accuracy and long life
- Goldmax low friction titanium coating to stop heat burn out
- High strength non slip shank design
| Part No | M Thread size and Pitch | L mm | L1 mm | Tap hole size (metric couarse thread) | Shank mm | Minimum torque to tap 20mm steel |
|---|---|---|---|---|---|---|
| 308010-0050 | M5 x 0.80 | 55 | 18 | 4.2mm | 11 | 200 Nm |
| 308010-0060 | M6 x 1.0 | 55 | 20 | 5.0mm | 11 | 240 Nm |
| 308010-0080 | M8 x 1.25 | 60 | 22 | 6.8mm | 11 | 280 Nm |
| 308010-0100 | M10 x 1.5 | 70 | 24 | 8.5mm | 11 | 300 Nm |
| 308010-0120 | M12 x 1.75 | 80 | 29 | 10.2mm | 11 | 320 Nm |
| 308010-0140 | M14 x 2.0 | 90 | 32 | 12.0mm | 11 | 340 Nm |
| 308010-0160 | M16 x 2.0 | 90 | 32 | 14.0mm | 11 | 360 Nm |
| 308010-0200 | M20 x 2.5 | 100 | 37 | 17.5mm | 11 | 400 Nm |
| 308010-0240 | M24 x 3.0 | 110 | 45 | 21.0mm | 11 | 600 Nm |
| 308010-0300 | M30 x 3.5 | 130 | 48 | 26.5mm | 11 | TBA |
Specifications
-
MPN:308010-0160
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product
