HMT Versadrive impactatap quick threading M10 galvernised impact tap from Wasp Supplies Ltd
HMT Versadrive impactatap quick threading M10 galvernised impact tap from Wasp Supplies Ltd
HMT Versadrive impactatap quick threading M10 galvernised impact tap from Wasp Supplies Ltd
HMT Versadrive impactatap quick threading M10 galvernised impact tap from Wasp Supplies Ltd
HMT Versadrive impactatap quick threading M10 galvernised impact tap from Wasp Supplies Ltd

HMT VersaDrive M10 Oversized Galv. ImpactaTap

£32.49
£38.99 (inc. VAT)
£38.23
Produces a M10 x 1.5mm oversize thread to compensate for galvanised coatings.

MPN : 308020-0100

Information
HMT VersaDrive™ ImpactaTap® M10 x 1.5mm galvanising impact tap produces an oversize thread, perfect for use prior to sending steelwork to the galvernisers, the oversized thread then compensates for the increased thickness the coating produces on galvernised steelwork and galvernised fixings.

VersaDrive™ galvernising impact taps can be used with an impact wrench and taps holes up to 15 times faster than when using a hand tap wrench, the Holemaker Technology (HMT) VersaDrive™ system allows the tapping bit to be used not only in an impact wrench but also in any reversible drill with a 1/2" chuck and any hand tap wrench.  The video below shows how versatile these metal cutting taps can be :- 
.

Versadrive Impacta Galv taps 
 
  • Extremely Fast tapping with minimal kickback, specially hardened for Impact wrench use.
  • Chipbreaker action for automatic chip clearance when impact tapping 
  • Unique dual point starting angle for easy alignment and fast cut.
  • Very high grade tool steel, with ground flutes for high accuracy and long life
  • Goldmax low-friction titanium coating to stop heat burn-out
  • High strength, non slip shank design
  • Oversize thread to compensate Galvernized coatings.

Part No
M
Thread size & Pitch
L
mm
I1
mm
Tap hole size
(metric coarse thread)
Shank
mm
Minimum torque to 
tap 20mm steel 
308020-0050 M5 x 0.80 (+0.15") 55 18 4.2mm 11 200 Nm
308020-0060 M6 x 1.0 (+0.15") 55 20 5.0mm 11 240 Nm
308020-0080 M8 x 1.25 (+0.15") 60 22 6.8mm 11 280 Nm
308020-0100 M10 x 1.5 (+0.15") 70 24 8.5mm 11 300 Nm
308020-0120 M12 x 1.75 (+0.15") 80 29 10.2mm 11 320 Nm
308020-0160 M16 x 2.0 (+0.15") 90 32 14.0mm 11 360 Nm
308020-0200 M20 x 2.5 (+0.15") 100 37 17.5mm 11 400 Nm
308020-0240 M24 x 3.0 (+0.15") 110 45 21.0mm 11 600 Nm
Specifications
  • MPN:
    308020-0100
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product