HMT MultiSink 40mm, 90° Tool available from Wasp Supplies Ltd secure online store
HMT MultiSink 40mm, 90° Tool available from Wasp Supplies Ltd secure online store
HMT MultiSink 40mm, 90° Tool available from Wasp Supplies Ltd secure online store
HMT MultiSink 40mm, 90° Tool available from Wasp Supplies Ltd secure online store
HMT MultiSink 40mm, 90° Tool available from Wasp Supplies Ltd secure online store

HMT MultiSink 40mm, 90° Tool

£80.51
£96.61 (inc. VAT)
£94.71
Part number 601050-0400

MPN : 601050-0400

Information
HMT 40mm MultiSink Combination tool 90°.
Made from Goldmax low-friction titanium coating to stop heat burn-out. 

The MultiSink is a worldwide unique new Countersinking Tool designed and developed by HMT for use with magnetic drills, allowing the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation - providing huge time saving benefits.

When used with a VersaDrive TCT Holesaw between 14 and 26mm a machine with a minimum stroke of 118mm is required. For best practice use a variable speed machine and reduce the speed for countersinking. 
When used with a heavy duty VersaDrive drill tap, or tap a machine with reverse capability is required. 

The Countersunk hole will be centered by the VersaDrive Tool it is piloted with, meaning that holes are accurately countersunk every time. As the MultiSink hole is self-piloted it will provide a smooth cutting action, preventing the chattering and reduced tool life commonly experienced with standard countersinks.

The MultiSink can also be used used as dedicated Countersink only tool used with the pilot pin to ensure smooth hole running and exact accuracy every time.

To Tap & Countersink or Drill, Tap and Countersink, requires a Magnet Drill with variable speed and reverse features.

When broaching and countersinking in one operation an extra long pilot pin is required part number 101021-600.

Standard 19.05mm Weldon shank for use in all standard magnet drills. The MultiSink can be fitted into Morse Taper arbors with 19.05mm / 3/4" Shank fitting for use in pillar drills and radial arm drills.
 

Specifications
  • MPN:
    601050-0400
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product