Covid-19 - WASP Supplies remain open and orders are being processed and despatched as normal.

Hardfacing 650 1.2mm HF 650 Mig wire 15kg spool

£294.00 (inc. VAT)
High alloyed mig wire for severe abrasion resistant applications
« Back
HF 650 1.2mm Mig wire 15kg spool

High-alloyed MIG welding wire for low impact and severe abrasion resistant applications, such as metal to metal wear.

Martensite steel, used on materials resistant to moderate impacts and to abrasion
  • Air hardening, crack free martensitic deposit
  • Resistant to hard particle abrasion and moderate impact loading
typical applications
 Hardfacing of tamping dies, crusher hammers and mixer blades, screw conveyors etc....

Can be used with a 307 Stainless mig wire which acts as a buffer layer prior to build up.

DIN 9555 material No MSG 3-60 GZ   1.2606

Hardness:                57-60HRC

Typical Analysis:    C     0.35%
                             Si    1.10%
                             Cr    5.20%
                             Mn   0.40%
                             V     0.40%

                             W    1.30%

Supplied on a 300mm Plastic Spool 300mm Diameter x 15Kgs

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product