Esab Warrior Tech welding Mask 0700000405 Air fed respirator prepared for air supplied with the New Esab PAPR 0700002300 Powered Respirator. Optional ESAB kit bag 0700002315.
The Esab Warrior Tech head shield is a standard shade 9-13 head shield designed for Mig, MMA (Arc) and Tig welding operations above 45 amps. This unit has air duct and face seal fitted ready for immediate use. Manufactured and tested to meet stringent EN12941 standards
The Esab PAPR Air powered respiratory unit has been designed to fit many Esab welding helmets and is approved for use with the Warrior tech head shield.
The unit provides clean, filtered air with a variable flow from 170-210 Litres a minute to increase the comfort and safety for the welder. 3 Speed settings.
The PAPR unit is delivered complete with an 8-hour Lithium-ion battery, P3 main filter, comfort pad, waist belt and an 850mm air hose with a fitted Proban flame retardant cover. The unit is supplied with an intelligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. The PAPR unit is also equipped
with a low flow alarm, which will give audible signal when the filter is blocked, or a different alarm if the battery is running low.
The New Esab PAPR unit has all the features of the more expensive Esab Aristo air but competitively priced just like the old Esab Eco air but now fully functional for today's welding safety requirements.
• Lightweight & Durable
• Proban Hose Cover Supplied as Standard
• Low Flow Warning Alarm
• Removable Li-ion Battery
• Large On/Off Switch
• Intelligent Charger
• Low Maintenance
• Low Level Noise
• User Friendly
• Power Unit with Warrior welding head shield .
• Waist Belt
• Comfort Pad
• Proban Hose Cover
• P3 Filter