230 volt single phase affordable Baileigh PT-22 plasma table with Hypertherm powermax 45 plasma cutter from wasp supplies ltd.
230 volt single phase affordable Baileigh PT-22 plasma table with Hypertherm powermax 45 plasma cutter from wasp supplies ltd.
230 volt single phase affordable Baileigh PT-22 plasma table with Hypertherm powermax 45 plasma cutter from wasp supplies ltd.
230 volt single phase affordable Baileigh PT-22 plasma table with Hypertherm powermax 45 plasma cutter from wasp supplies ltd.
230 volt single phase affordable Baileigh PT-22 plasma table with Hypertherm powermax 45 plasma cutter from wasp supplies ltd.

Baileigh PT-22 plasma table for Hypertherm powermax 45 plasma cutter

£2,873.00
£3,447.60 (inc. VAT)
£3,190.00
230 volt table and plasma cutter, pierce capacity 10mm, cut capacity 19mm. Delivery, Installation and training included mainland England and Wales, price supplement may apply to other areas.

MPN : PT-22

Information

The Baileigh PT-22 plasma table is not your normal 2 foot x 2 foot plasma cutting table.  The PT-22 offers many features not found on the competition at a great price.  First off, the PT-22 comes fully assembled, no need to spend hours building hoping to have the alignment correct.  A water bed, to capture dross and fume is supplied as standard, not an upgrade.  Another nice feature of the PT-22 is that is comes with the material cross supports pre cut.

Operation of the table itself only requires 220 volt single phase power so it will work at almost any fabrication site anywhere, home, workshop, factory, school, college or university.  The PT-22 also comes standard with two different types of torch holder, one for an automated style system and one that is configurable to any hand held torch on the market.

  The PT-22 comes standard with an easy to use design software package that allows the user to design or plot out a job on any computer, transfer the saved job to a usb memory stick, before loading into the hand held pendant, which is then used to move the torch to the correct position on the table bed. the pendant also starts and stops the plasma cutting operations.  

This machine is supplied ready to interface with the 230 volt  Hypertherm Powermax 45 plasma cutting power source and Hypertherm T45M machine cutting torch, which can be purchased separately (see below), the Plasma cutter is interfaced with the PT-22 plasma table,we also offer an optional Hypertherm T45 hand torch, which can very quickly be connected to the plasma power source to cut plate to size so it can be fitted onto the PT-22 table top. The machine torch can then be reconnected in seconds ready for table cutting.  

We recommend the Hypertherm powermax 45 to pierce mild steel with a maximum thickness of 10mm (3/8") or edge cut up to 19mm (3/4") which is the maximum thickness plate this table was designed for.The Plasma power source has a severence capacity of 25mm(1"). 

See specifications for power and gas requirements.

see 2 Videos 
 

Specifications
  • MPN:
    PT-22
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product