Wasp Supplies are recruiting, see our Job Opportunities section

3 stage Filtration, low use systems

£0.00 (ex vat)

£0.00 (inc. VAT)
£8.75 + VAT Shipping.
Spend £70 or more for free shipping to UK Mainland
Excluding Scottish Highlands.
Light duty usage
« Back

If your compressor is a piston type compressor to provide clean dry air for light duty applications,) which is classed as cutting for less than 1 hour per day), we are able to provide a 3 stage filter system to filter your air down to 0.01 micron. 

The main points to note are Piston compressors are prone to heating air which condenses once cooled, Water droplets can cause the following issues with mechanised plasma cutting. 

  • Excessive consumable wear 
  • Bad cut quality 
  • Torch height control issues such a diving or Oscillating 
  • Premature air filter blockages 
  • Premature torch failure 
  • Premature automatic solenoid failure. 

Download the full Swiftcut air requirements guide here  

Minimum air requirements, constant flow,  by plasma cutter 

Machine L/min CFM Pressure 
Powermax 45XP, 65 , 85  188 6.75 85 PSI
Powermax 105 217 7.80 85 PSI
Powermax 125  260 9.4 85 PSI 

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product