Wasp Supplies remain fully open with web site orders being despatched as normal .

0700300998 ESAB Rebel 205ic AC/DC Multi-process welder

£3,900.00 (inc. VAT)
110/230 volt Mig, MMA, AC?DC Tig with HF

MPN : 0700300998

« Back

The brand new  0700300998 ESAB Rebel 205ic AC?DC mufti-process welder is a breakthrough in welding technology. This machine is packed with features to be able to operate all welding processes from one highly portable power source,  including 235 amp output Mig welding,and reverse polarity Mig welding for self shielding flux cored wires, 170 amp MMA (arc - welding) including Cellulosic function, 205 amp DC Tig with high frequency start and 205 amp AC Tig with Balance and Frequency control for welding Aluminium. 

Not only can this portable power source (26kg) weld every process, it can also perform absolutely anywhere as it is capable of working from a single phase supply with an input voltage range of 110 volt for Construction sites through to 230 volt when back in the Workshop, Garage or Industrial premises. 

Delivery includes: power source with 3 m mains cable and plug, MXL 201 MIG torch 3m, SR-B 26 TIG torch with accessories (3 collet 1.6-3.2 mm, 3 collet body 1.6-3-2 mm, 1 long back cap, 3 ceramic nozzles and 3 gold tungstens1.6-3.2 mm), electrode holder, return cable and clamp 3 m, gas hose with quick connector 4.5 m, drive rolls for 0.6,0.8and1.0 mm wire, guide tubes 0.6-1.2 mm, thickness gauge tool

  • Professional TIG features such as High Frequency start in DC and AC modes, balance adjustment, frequency adjustment and Pulse DC.

  • sMIG Technology - exclusive sMIG ("smart MIG") feature continuously learns and adapts to the operator’s welding technique to provide a stable arc and superior, repeatable welds; increases productivity for the experienced welder, and reduces training time for novice welders

  • Unmatched Portability and Durability weighing in at only 25.5kg, Rebel EMP 205ic AC/DC with 5 handle roll cage can tackle any job around the shop or out on site

  • TFT Multilingual Display - packed full of features, Rebel EMP 205ic AC/DC has 4 programmable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting - giving you the ability to fine tune your welds for the most optimal performance

  • Amplitute offset - Effortlessly direct more energy into the workpiece, remove heat from the tungsten to avoid balling and damage, create a smaller bead profile, improve penetration, or reduce preheat on thick material.

  • Dual solenoid value - Conveniently set up your MIG gas and your TIG gas without having to switch back and forth.

  • Pulsed TIG - Pulsed TIG DC range between 1 and 500 pulses per second (pps): Achieve better control and higher travel speeds when working with thin carbon steel or stainless steel.

  • AC Performance - AC wave balance from 60% to 90% electrodenegative (EN) amperage: Turn it up to boost penetration, and turn it down to help clean away aluminium oxide. AC frequency from 25 to 400 Hz: Get precise control over the arc cone and direction for superior penetration and higher travel speeds.

Full function TIG features
Fixed or limited settings won’t cut it in the industrial world. We built Rebel EMP 205ic AC/DC for welders who want full control over the arc for unmatched performance. That means you get LiftTIG and high frequency (HF) start, AC wave balance (60%–90%), AC frequency (25–400 Hz), pulsed (DC) (1–500 pps), and amplitude offset – the next level in AC TIG adjustment.

For more info and detailed technical information please download the spec sheet here 

  • MPN:
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product