Wasp Supplies are recruiting, see our Job Opportunities section

059532 Hypertherm Powermax 125, with CPC and Serial Port, 7.6m machine torch

£7,320.00
£8,784.00 (inc. VAT)
£9,150.00
25mm pierce capacity

MPN : 059532

« Back
Information
The Hypertherm powermax 125 is a 125 amp plasma cutter that can be used in either Hand or Mechanised cutting operations. Both the plasma power source and the vast array of Duramax Hyamp cutting torches are 100% rated for continued use  to cope with the most demanding applications.

This  Hypertherm package has a part number 059532 which comprises of the Power source and mains lead, 7.6m work return lead (earth), CPC remote port, voltage divider card, RS 485 serial port and 7.6 metre 180 degree machine cutting torch .


This plasma cutter has a maximum cutting capacity of 57mm and a recommended cutting capacity of 44mm when edge cutting or 25mm capacity when piercing  using a mechanised XY table, which gives a superb finish on 25mm plate. 

New Duramax Hyamp torch styles provide versatility for hand cutting, portable automation, x-y table cutting, and robotic cutting and gouging. Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length. It also detects electrode end-of-life, automatically turning off power to the torch to prevent potential damage to other parts or the workpiece.

Specifications 
 
Input voltages CSA 480/600 V, 3-PH, 50/60 Hz
CE 400 V, 3-PH, 50/60 Hz
CCC 380 V, 3-PH, 50/60 Hz
Input current @ 21.9 kW 300/400/480/600 V, 38/36/31/24 A
Output current 30 - 125 A
Rated output voltage 175 VDC
Duty cycle @ 40°C (104°F) 100% @ 125 A
Open circuit voltage (OCV)
  • 400/600 CSA
  • 380 V CCC
  • 400 V CE
  • 320 VDC
  • 290 VDC
  • 305 VDC
Dimensions with handles 592 mm D; 274 mm W; 508 mm H (23.3" D; 10.8" W; 20.0" H)
Weight with 7.6 m (25') torch 480 V   47,9 kg (105.7 lbs) 
600 V   47,5 kg (104.7 lbs) 
380 V   45,2 kg (99.6 lbs) 
400 V   48,9 kg (107.8 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet 
flow rate / pressure
Cutting: 260 l/min (550 scfh) @ 5.9 bar (85 psi) 
Gouging: 212 l/min (450 scfh) @ 4.1 bar (60 psi)
Input power cable length 3 m (10')*
Power supply type Inverter - IGBT
Engine drive requirement 40 kW for full 125 A output
Certifications CSA-certified for use in the Americas and Asia, except China. 
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. 
CCC for use in China.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.


 
Specifications
  • MPN:
    059532
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product